1. Please use this product with 12V DC.
2. Please complete the ESD-prevention before using.
3. The flexible LED strips should be neither bent into right-angles nor folded.
4. For flexible LED strips , every three LEDs on the same strip can be cut off and use separately
(namely, every 100mm works as a group). Please refer to the ‘Outline’ for the details.
5. The calculating way that how many this flexible LED strips a power supply can upload is: the current(A) that the power supply can offer/the current distributed to each single group*total group of this product
6. The flexible LED strips quantity of each sting that directly connected to the power supply should not exceed 30 PCS; otherwise, the brightness of the strip at the end of the string will be dimmed because of the voltage
reduction. Although a loop circuit can avoid reduction happening, one string should not connect too many strips.
7. The wire with gray line is anode, while the red、green、blue 、yellow、white is cathode, If polarities
connected in a wrong way, the flexible LED strips will not be lit, but will not be damaged either. What
only needs to do is changing the polarity connection.
8. When installing the flexible LED strips in the plastic letters or characters, please try to use 3 or 4
branch wires and when doing the connection try to make the flexible LED strips in a letter or character or box form a loop circuit or several loop circuits by using red and black wire to connect the strips at the end of the strokes together according to their polarities.
9. This flexible LED strips is water-proof.
10.When installing the strip, the double-sided adhesive tape or carpenter’s glue is required to make the clip slot of the strip firmly stuck together. When using the double-sided adhesive tape, proper glass glue must be spread to avoid the strip falling off after long-time exposed in the sunlight.
11.The flexible LED strips quantity of each sting that directly connected to the power supply should not exceed
30pcs; otherwise, the brightness of the strip at the end of the string will be dimmed
because of the voltage reduction. Although a loop circuit can avoid reduction happening, one string should not connect too many strips.
12.No push, squeeze or press on the components of the flexible LED strips for fear damaging the components to affect the lighting effects.